Thick plate
Multi-Head CNC Flame Cutting
Up to four oxy-fuel torch heads on a 16 m × 4 m gantry, cutting 20–300 mm carbon and low-alloy plate with controlled preheating and slow cooling.
YXYSteel information
CNC Flame, Plasma & Laser Cutting
Processing · CNC Thermal Cutting
Flame, Plasma & Laser Cutting on One Cutting Floor
Three thermal cutting processes on one cutting floor: multi-head CNC flame cutting for the thickest plate, high-definition plasma for fast carbon and stainless work, and 20,000 W CNC laser cutting for burr-free precision parts.
6–300 mmCutting thickness range
±0.5 mmDimensional accuracy
16 m × 4 mMaximum cutting envelope
CAD/DXFDrawing formats accepted
Process & Equipment
Four CNC Cutting Capabilities
Flame, plasma and laser heads are matched to thickness, edge quality and the welding process that follows.
Fast cycles
High-Definition Plasma Cutting
HD plasma for 6–80 mm carbon and stainless plate — fast cycles with a smooth, low-dross cut face that needs minimal secondary finishing.
Custom profiles
CAD / DXF Nesting & Profiles
Your CAD, DXF, DWG, PDF or scanned drawing is nested for material yield, then cut as profile parts, ring plates, gussets or replacement liners.
Precision
20,000 W CNC Laser, 16 m Table
A 20,000 W laser on a 16 m × 4 m worktable cuts 6–60 mm plate with burr-free edges, tight tolerance and clean holes without secondary machining.
Process guide
CNC Cutting Process Comparison
Use this table as a process guide for your enquiry; the final route is confirmed against the drawing, grade and quantity.
| Process | Typical thickness | Achievable tolerance | Edge condition | Best suited to |
|---|---|---|---|---|
| CNC flame (oxy-fuel) | 20–300 mm | ±1.0 mm | Heat-affected, machinable | Thick plate, straight and profile cuts |
| HD plasma | 6–80 mm | ±0.5 mm | Smooth cut face, minimal dross | Carbon and stainless plate, fast cycles |
| CNC laser (20,000 W) | 6–60 mm | ±0.2 mm | Burr-free, tight tolerance | Precision parts, holes, complex nests |
| Bevel edge milling | 6–150 mm | ±0.5° bevel angle | V / Y / X bevel, weld-ready | Automatic and robotic welding preparation |
Accepted drawing formats: CAD (DWG/DXF), PDF and scanned drawings with dimension callouts. Material certificates accompany the finished parts on request.